Is the compressed air kWh forecast free?

Yes. The indicative kWh forecast and initial system review request are free. The result is based on submitted operating data and stated assumptions.

Is the 35% Energy Delta a guarantee?

No. It is a planning benchmark for comparing suitable PMV variable-speed operation with standard fixed-speed operation under defined conditions. Actual performance depends on site data, pressure, flow, operating hours, tariff, installation and model-level evidence.

Is this a replacement for an energy audit?

No. The forecast is an indicative estimate based on inputs and assumptions. A measured compressed air assessment aligned with ISO 11011 requires actual system measurements and documented engineering analysis.

What is a System Review?

A System Review is a preliminary engineering check of pressure, FAD, operating hours, load profile, air quality, dryer and filtration needs, and possible compressor series fit.

Which countries are served?

The intake route is available for international industrial buyers. Mainland China and Hong Kong are excluded from this lead-routing path.

The result can be printed or saved as a one-page PDF containing the forecast range, assumptions, preliminary series match and next engineering action.

How fast is the response?

An initial engineering response is planned within one business day when the submitted information is complete. Response time can vary with data quality, time zone, application complexity and configuration requirements.

Is my data shared externally?

The information is used for the forecast, internal engineering review and response to the request. The form does not automatically send the information to an external contact.

What is your delivery time for PMV screw air compressors?

Our standard delivery time is 35 days for PMV screw air compressors. For customized units or special configurations, delivery may extend to 45-60 days depending on specifications. We offer express production scheduling for urgent orders.

Does AirSpace Machinery have CE and ISO 9001 certification?

Yes. AirSpace Machinery Co., Ltd. is CE certified and ISO 9001:2015 certified. Our quality management system meets international standards, and all our compressors undergo rigorous testing before shipment. We follow CE and ISO 9001 quality standards across our entire product range.

What is the warranty period for your air compressors?

We offer a standard 1-year warranty on all PMV screw air compressors. The permanent magnet motor carries a 2-year warranty. Extended warranty options up to 5 years are available upon request. Warranty covers manufacturing defects and component failures under normal operating conditions.

What is the energy savings percentage of your PMV compressors?

Our Permanent Magnet Variable Frequency (PMV) screw air compressors deliver 35-50% energy savings compared to traditional fixed-speed compressors. The permanent magnet motor technology combined with variable frequency drive minimizes unload running time and reduces electricity consumption significantly.

Do you offer oil-free air compressors?

Yes. We manufacture oil-free screw air compressors that achieve Class 0 oil-free air quality per ISO 8573-1 standards. These are ideal for pharmaceutical, food processing, medical equipment manufacturing, electronics, and other contamination-sensitive applications.

What is the noise level of your air compressors?

Our PMV series compressors operate at noise levels as low as 62 dB(A), making them among the quietest industrial air compressors available. This low noise operation is ideal for facilities where noise regulations are strict or where compressors are installed near work areas.

What power range do your compressors cover?

AirSpace Machinery manufactures PMV screw air compressors from 2HP to 540HP. Our product range includes oil-free, low-pressure, medium-pressure, and diesel-driven portable units, as well as refrigerated air dryers and complete industrial-grade compression equipment.

Do you offer after-sales support and spare parts?

Yes. We provide comprehensive after-sales technical support including remote troubleshooting, spare parts supply, and maintenance guidance. Our 20 years of engineering expertise means we can support our compressors throughout their entire service life.

Can you customize compressors for specific applications?

Yes. We offer customized solutions for specific industrial requirements including special voltage requirements (60Hz/50Hz), high-altitude derating for mining applications, specific pressure ranges, and integration with existing compressed air systems. Contact our sales team with your requirements.

What is your minimum order quantity (MOQ)?

Our standard MOQ is 1 unit for stock models. For customized configurations, MOQ may vary based on specifications. We welcome both small trial orders for new customers and large-volume orders for established partnerships.

Get a Free Compressed Air kWh Forecast & System Review

Q: What data is needed?

Useful inputs include compressor power, working pressure, FAD or flow, operating hours, electricity tariff, current compressor type and estimated demand or load.

Direct answer: A free compressed air kWh forecast provides an indicative estimate of annual compressor energy use and electricity cost. The calculation uses operating data such as compressor power, working pressure, FAD or flow, operating hours, electricity tariff and estimated demand.

The result is method-based and assumption-based. It is not a savings guarantee, a fixed payback promise or a substitute for a measured compressed air energy audit aligned with ISO 11011 principles.

Get a Free kWh Forecast Request a Free System Review

kWh Forecast

Estimate annual energy use and electricity cost from your power, operating hours, tariff and demand assumptions.

Method: power × time × estimated utilization. Indicative only.

Series Match

Receive a preliminary planning match for PMV, oil-free, low-pressure or laser compressor systems.

Final selection requires confirmed FAD, pressure and site conditions.

Engineering Review

Submitted information can be reviewed by an engineer. Missing data is clearly marked rather than replaced with false precision.

Result may state: Insufficient data—engineering review required.

How the Free Review Works

1. Enter operating data Provide the information available for your current compressed air system. A perfect data set is not required to start.

2. Receive an indicative result The calculator presents low, base and high scenarios where the data is sufficient for a reasonable estimate.

3. Download the summary A one-page summary can be printed or saved as PDF for internal review. No automatic external message is sent.

Complete the Forecast and System Review Form

Please provide the following technical information where available. More complete data improves the forecast confidence.

Work email, country or region, company and industry
Compressor power in HP or kW
Working pressure in bar or psi
FAD or flow in m³/min or CFM
Operating hours and electricity tariff
Current compressor type and estimated load profile
Site temperature, altitude and air-treatment requirements where available

This international intake route excludes mainland China and Hong Kong. Your data is used for the forecast, internal engineering review and response to your request. It is not automatically sent to an external contact.

Your Indicative Compressed Air Energy Forecast

Low scenario — —

Base scenario — —

High scenario — —

Preliminary system match: —

Pressure / application note: —

Confidence: Estimate

The 35% Energy Delta is a planning benchmark for comparing PMV variable-speed operation with fixed-speed operation under suitable variable-demand conditions. It is not a guaranteed saving percentage. Actual results depend on site measurements, load profile, pressure, FAD, operating hours, tariff, installation and model-level data.

Insufficient data—engineering review required.

Please submit the available operating information. An engineer can review the requirement before a final quotation or model selection.

Important Calculation Notes

The forecast uses an indicative formula based on compressor power, operating hours, electricity tariff and estimated utilization. Where only HP is available, HP is converted to kW using 0.746.

No fixed payback period is promised. The 35% planning benchmark is not automatically applied as a guaranteed result. A measured assessment should use actual power, pressure, flow, operating hours, leakage and site data.

Get a Free kWh Forecast Request a Free System Review

Work Email

Country

Company

Industry

Contact Name

First

Last

Compressor Power (HP or kW)

Working Pressure (bar)

Required FAD / Flow

Operating Hours per Year

Electricity Tariff

Currency

Current Compressor Type

Estimated Load

Quantity

Unload Hours

Voltage/Frequency

Ambient Temperature

or Hours Ambient

Target Install Date (e.g. Dec 2026)

Altitude

Dryer/Filter Needs

Refrigerated Air Dryer
Absorption Desiccant Air Dryer
Precision Filter

Current Pain Points

Preferred Contact

⚡ Is Your Factory Bleeding Cash?

Most fixed-speed compressors waste $3,600/year in "Unload Tax." Test your waste level in 30 seconds.

RUN THE ROI TEST →

Free Compressed Air kWh Forecast System Review